Crazy GIGI Evidence Center: Test Method, Claim Status and Raw-Data Rules

This evidence center defines what HIMERO may claim about Crazy GIGI and how each performance result must be measured. Until a result has a disclosed sample, method, condition, date and raw record, it remains a manual-confirmed or brand-claimed value—not an independent measurement.

Updated July 27, 2026 · HIMERO Editorial · Search intent: evidence verification / product research

Claim-status ledger

Governance: what counts as a result

A publishable result must identify the tested unit, firmware or control version, setup, measurement instrument, units, room condition, number of repetitions and raw evidence location. We report failed runs and outliers rather than deleting inconvenient observations. A marketing sentence may quote only the tested condition and must link to the full record.

A supplier specification can remain useful, but it must be labeled. “Manufacturer-rated 60 minutes” and “measured 58 minutes at mode X” are different claims and must not be blended.

Protocol 1: usable travel

1. Secure the powered body without restricting the moving assembly.
2. Define and mark one reference point visible through the full path.
3. Place a millimetre scale in the same plane to minimize parallax.
4. Record at 60 fps or faster with the sleeve installed.
5. Measure minimum and maximum positions at low, medium and maximum speed.
6. Repeat with the agreed compliant load and repeat every condition three times.
7. Report the individual values, mean, range and whether the value is empty, sleeve or effective loaded travel.

The 150 mm brand claim is not unlocked by one favorable frame. The repeated usable result must be consistent with the published definition.

Protocol 2: cycle rate and control response

Set declared top and bottom endpoints, record complete cycles over at least 30 seconds and calculate strokes per minute. Repeat every relevant speed level or a predeclared representative subset. Log the stroke mode because M1, M2 and M3 use different path directions. For device-control response, record the time from a visible button press to a visible movement change without hidden edits. For app response, name the supported app, version, operating system, connection method, region and configuration under test; a result applies only to that compatible configuration.

Protocol 3: simultaneous motion and safety controls

Use one uncut view showing the device, control input and moving component. Confirm stroking and vibration at low, medium and high combinations. Test pause, resume and power-off. The manual states that a long press can pause telescopic movement while vibration continues; the test must document the actual current-production behavior and any exception.

Protocol 4: noise

1. Use a calibrated or calibration-checked A-weighted sound meter.
2. Record room background before the device starts.
3. Measure at one metre on a stable, non-resonant surface.
4. State sleeve state, load, stroke mode, speed and vibration setting.
5. Record equivalent level and maximum level for the same interval.
6. Repeat three times and do not compare against competitor numbers measured at another distance or condition.

Protocol 5: runtime and temperature

Start from a full charge after the same charge-rest procedure, disconnect the charging cable, and never operate the product while it is charging. Use a defined combined stroking and vibration setting. Record time to automatic shutdown, interruptions, ambient temperature and surface temperature at fixed intervals. Stop the run if the unit becomes unusually hot or shows damage, deformation, discoloration or unusual odor; quarantine the sample and record the event rather than treating it as a completed runtime. Repeat for at least three charge cycles only when the unit remains within the supplied guide's safety boundary. If firmware or battery supplier changes, start a new series rather than merging results.

Protocol 6: cleaning, drying and durability

The supplied guide identifies ABS + TPE materials and says to wash only the removable TPE sleeve; the powered main body must stay out of water and be wiped rather than washed or immersed. Record hands-on removal, washing, rinsing and reassembly time separately from passive drying. Use only the care products permitted by the supplied instructions. Repeat the removal-and-clean cycle to check deformation, tearing, discoloration, unusual odor and reinstallation fit; stop and contact support when a safety condition appears. Never describe the whole product as waterproof or infer a medical benefit from a care instruction.

Protocol 7: offline function matrix

Test four states separately: normal connected use, phone unavailable, internet unavailable and account/service unavailable. In every state, record start, stroke speed, stroke position or mode, vibration, pause, stop, saved patterns and content features. “Works offline” may be published only beside the named functions that passed; one physical power button does not prove an offline session.

Protocol 8: app, local media, Funscript and sync testing

HIMERO confirms optional companion-app controls and Content Sync in compatible configurations; this protocol defines how each named configuration will be tested independently. Record the media source, file or script format, app/player and version, operating system, connection type, region, login requirement, paid entitlement, supported motion output and failure behavior. Capture the media cue and device response in one high-frame-rate view, repeat at least ten cues, and report median delay, range and drift after seeking. Document whether the local media file, filename, script or usage event leaves the user's device. Remote partner control is not part of the current claim. A passed Funscript workflow would prove only that named workflow, not automatic interpretation of arbitrary media.

Protocol 9: sleeve, holder and adapter compatibility

Name the exact sleeve, holder and adapter rather than using “universal.” Measure the relevant outer diameter, usable length, mass and retention geometry. Test insertion, removal, low/medium/high loaded motion, emergency stop and repeated direction changes. Record slipping, rotation, pinching, jamming, unexpected noise and motor temperature. A fit claim fails if the sleeve merely enters the holder but cannot remain stable through the declared range.

Protocol 10: mounting, surface vibration and stability

Test every named mount on the surfaces the instructions permit. Record device orientation, mount torque or clamp position, surface material, load and operating settings. Film the full device and attachment point while checking drift, loosening, desk resonance, emergency-stop reach and post-test damage. Noise results must distinguish airborne device sound from surface-amplified vibration; a stable hand-held test does not prove a desk-mount claim.

Raw evidence package

• Uncut source clips with file hashes and capture date.
• Measurement sheet with units and repeated observations.
• Photos of setup, scale placement and instrument distance.
• Manual/model/firmware version and sample identifier.
• Deviation log explaining any invalid run.
• Public summary that links each marketing claim to the relevant result.

Independent review and corrections

HIMERO authors the method and sells the product, so the first publication is not independent. A later third-party test must disclose sample source and method. If a stronger result contradicts an existing page, the page, comparison database and snippets must be corrected together, with the old claim retained in the change log.

Sources, evidence type and checking date

Sources were checked July 27, 2026. Product specifications, prices, software and availability can change. A linked manufacturer page proves only what that source states; it is not an independent laboratory result.

• First-party product document: Crazy GIGI LG-389 user manual and cleaning guide supplied with the current product files — manual file dated January 26, 2024; SHA-256 7ba8032864ad72085a48c2245ea188eaca6d919a457778e6a814c750dd2aca8d; available from support on request; confirms controls and care boundaries but is not an independent test
• Brand product page: Crazy GIGI product page — current commercial claims and price; independently tested values remain pending